INVERTERS FOR SOLAR / BATTERY STORAGE

Part No: DDSU666-H-1PH-100A Display - Energy Meter Huawei Smart Power Sensor DDSU666-H With 1x 100A  Current Transformer Measurement accuracy ＞class 1 within full temperature range Simple & Easy LCD display, convenient for users, easy to set and check Visual color identification for simple wiring Energy Efficient Overall power consumption ≤ 1 W Standard din-rail mounting of DIN 35mm Supplier Part No: DDSU666-H Weight: 1.5 kg

Read more less

Part No: SOL-5.0-S6-DT-DC Inverters - Main Units Rating: 5,000W Phases: 1 Solis S6 is the latest generation of residential inverters from Solis. This range of inverters are leaders in affordable small residential and commercial rooftop installations.  Product Features   Maximum string input current 14A   Easy installation: Integrate with export power control function and DRM function.   Max. Efficiency over 97.7% European efficiency over 97.1%   Wide input voltage range for better generation and low startup    Dual MPPT design with precise MPPT algorithm   Export Limitation built in - Requires CT clamp (sold separately)   Integrated AFCI (DC arc-fault circuit protection)   Rated IP66 With built in DC switch.    Supplier Part No: S6-GR1P5K-DCWeight: 12 kgRated Power: 5,000 WMin PPT Voltage: 60 VMax PPT Voltage: 600 VDC Startup Voltage: 60 VDC Shutdown Voltage: 50 VMax Input Voltage: 600 VMax DC Power: 7,500 WMax AC Power (5 Minutes): 5,000 WSurge AC Power (1 Second): 5,000 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 2Euro Efficiency: 97.1 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 5 yearsClick Here For Specs

Read more less

Part No: SOL-S5-GC25K-DC Inverters - Main Units Rating: 25,000W Phases: 3 S5-GC25K - Series 5 Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.5%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 32A input per MPPT, 16A input for each PV string Maximum AC output power of 27.5kW  3 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated  DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. SA: NRS-097-2-1 Certified EU: German installation manual stlll pending from manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems. Supplier Part No: SOL-S5-GC25K-DCWeight: 66 kgRated Power: 25,000 WMin PPT Voltage: 200 VMax PPT Voltage: 1,000 VDC Startup Voltage: 200 VDC Shutdown Voltage: 180 VMax Input Voltage: 1,100 VMax DC Power:  37,500 WMax AC Power (5 Minutes): 25,000 WSurge AC Power (1 Second): 27,500 WMax DC Current: 96 AMax DC Inputs: 6Has DC Fuses: 0Connector: MC4Included Connectors: 12Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity : 3Has Integrated DC Switch: YesWarranty: 5 years Click Here For Specs    

Read more less

CLICK HERE FOR SPEC SHEETS   The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.   Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP482120000 Voltage 48 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 1200 Peak Power (W) 2400 Max Efficiency 95% Zero Load Power (W) 10 Charge Current House Battery (A) 13 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H406 x W250 x D100mm Weight (kg) 8.2 Warranty 5 Years Country of Manufacture China

Read more less

CLICK HERE FOR SPEC SHEETS   Multifunctional Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation. Models: 3000VA, 5000VA, 8000VA, 10000VA, 15000VA Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output. Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control Monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more… Two AC inputs with integrated transfer switch The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source. Two AC Outputs The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel operation Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output power and 840 Amps charging capacity. Split phase options Two units can be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30kW / 36kVA of split phase power.Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240V / 60Hz. Three phase capability Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded. PowerAssist – Boosting shore or generator power This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices.Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely. Weight 41 kg Dimensions 280 × 350 × 470 mm Brand Victron Energy Input Voltage 48V Output Voltage 230V Wattage (W) 6500W Region UK, Europe, French, Australia/New Zealand, Worldwide Current (Amps) 110A Inverter Type Pure Sine Wave Warranty 5 Years

Read more less

MEGA-fuse holder, Holds all MEGA-fuses. Brand Victron Energy Manufacturer Part Number CIP050060000 Warranty 5 Years    

Read more less

The MXS 5.0 is a charger that offers state of the art technology that was previously only found in CTEK's professional product range. The charger can solve a broad range of battery-related problems and is the perfect charger for those with high demands. The MXS 5.0 is a fully automatic 8-step charger that delivers selectable 0.8A or 5A to 12V batteries from 1.2-110Ah and is suitable for maintenance charging up to 160Ah.   Charges batteries from 1.2Ah up to 110Ah Splash resistant & dustproof to IP65 Cold weather programme for charging in cold conditions and for AGM batteries Recond programme - special programme to revive deeply discharged batteries 5 year warranty CLICK HERE FOR SPEC SHEET Brand CTEK Charge Voltage 12 V Charge Rate 5 A Guarantee 5 Years

Read more less

 Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).  Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only.  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ORI481210110 Input Voltage Range 32-70V Under Voltage Shutdown 28V Under Voltage Restart 30V Nominal Output Voltage 12.2V Output Voltage Adjust Range 10-15V Short Circuit Output Current 27A Cont. Output Power at 25°C 110W DC Connection Screw Terminals Protection Category IP43 Dimensions H100 x W113 x D47mm Weight (kg) 0.42 Warranty 5 Years

Read more less

Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).  Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only.  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ORI482428110 Input Voltage Range 32-70V Under Voltage Shutdown 28V Under Voltage Restart 30V Nominal Output Voltage 24.2V Output Voltage Adjust Range 20-30V Short Circuit Output Current 30A Cont. Output Power at 25°C 320W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.   Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.  For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Input fuse (not replaceable)  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ORI122424120 Warranty 5 Years Weight (kg) 1.3 Efficiency 88% Dimensions H130 x W186 x D70mm Input Voltage Range 8-17 V Protection Category IP43 Nominal Output Voltage 24.2 V Output Voltage Adjust Range 20-30 V Under Voltage Shutdown 7 V Under Voltage Restart 7.5 V DC Connection Screw Terminals Cont. Output Power at 25°C (W) 280 Cont. Output Power at 40°C (W) 240

Read more less

The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers. It supports the following applications: Solar lighting applications Virtual load output Lighting Applications The cable is designed for lighting applications in solar energy systems.Energy consumption can be significantly reduced by the ability to dim lighting when needed. Lower power consumption will reduce the overall system cost. Also, the availability of the lighting will increase, even in case of a partially charged battery in low sun.The cable connects the TX output of the VE.Direct connector of a MPPT charger with the PWM dimmer input of the LED driver. Virtual load output The cable is designed for adding load output functionality to the larger MPPT chargers (MPPT 100/30 and larger) that do not have a load output. The cable connects the TX output of the VE.Direct connector of a MPPT charger with a battery protect or a solid state relay to switch a load on or off.  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS030550500 Warranty 5 Years

Read more less

 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.   MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. Load output The intelligent Load output function prevents damage caused by running batteries ‘flat’. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here’s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can’t – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.  CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC110015060R GTIN 8719076040811 Battery Voltage 12/24 Auto Select Rated Charge Current 15A Nominal PV Power, 12V 220W Nominal PV Power, 24V 440W Max. PV Short Circuit Current 15A Maximum PV Open Circuit Voltage 100V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H100 x W113 x D50mm Weight 0.6Kg Warranty 5 Years

Read more less

Part No: SUN6KTL-L1 Storage Systems - Hybrid Inverter Huawei Fusion Home SUN2000L1 - 3/ 3.68 / 5 / 6KTL The Smart Energy Controller (SUN2000- 3 / 3.68 / 5 / 6KTL-L1) is Huawei new single-Phase inverter and is direct compatible with their own Huawei Luna battery Product Features Direct compatible with Luna battery and is Plug and Play and no extra devices is needed AI Self leaning new arc detection Is compatible with the Sun2000-450W-P optimizer Simple commissioning by APP Auto-detection of system equipment Registering your plant by scanning any device Energy Flow illustration Real-time data at anytime and anywhere Performance data back-up Physical & logical module layout Module -level performance monitoring Smart I-V Diagnosis Smart dongle Plug and Play (LAN or 4G dongle available) Smart dongle support up to 10 inverters IP 65 Can be installed without batteries as 'battery ready' Max 3 batteries per inverter Supplier Part No: 01075345 Weight: 14 kg Rated Power: 6,000 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 9,000 W Max AC Power (5 Minutes): 6,001 W Surge AC Power (1 Second): 6,002 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet Huawei L1

Read more less

Part No: KG20-T104GB Switches - DC Isolators Kraus & Naimer DC Switch Switch - Disconnectors, 4 pole - for 2 strings             IP66/67 Protection             Black/Grey Padlockable Handle – lockable in the OFF-position             Class II compliant, Grey Insulated Enclosure             Switch Interlocked with lid to prevent opening in “ON” position             Rated for use in ambient temperatures of 50°C UK Please note: We will have reduced availbility of K&N switch gear for the immediate future. We have sourced alternative options for this period of low stock, please contact your account manager for more information. Supplier Part No: KG20 T104/GB-P103 KL51V Weight: 0.43 kg Poles: 4 Max Cable: 6 mm2 Max Voltage: 460 V Rated Current: 25 A Rated Voltage: 220 V Rated Current: 21 A Rated Voltage: 280 V Rated Current: 20 A Rated Voltage: 340 V Rated Current: 18 A Rated Voltage: 400 V Rated Current: 11 A Rated Voltage: 460 V Established in 1907 in Austria, Kraus & Naimer has grown to be one of world's highest quality and largest switch manufacturer in the world. For over 100 years Kraus & Naimer have been manufacturing top quality electrical switches and now offer the widest range of solar photovoltaic AC and DC isolators on the market. Every solar PV system requires at least one DC disconnector to isolate the PV array from the input to the inverter and at least one AC disconnector to isolate the inverter from the mains supply. Choosing a well proven and high quality product for these small but vital parts of any PV system is essential and there is no safer choice than Kraus & Naimer.

Read more less

Part No: X1-EPS-UK Storage Systems - Accessory Solax X1-EPS-UK - Emergency Power Supply Box - Backup BOX 100A EPS Box integrates two contactors which provides simple connection for users. It is compatible with X-hybrid E Series inverter. Configured with EPS Box, customers just need to connect several wires between inverter and EPS Box.   Please check if that’s sufficient in the property where you are planning your install. Please only wire essential loads to the EPS circuits. Supplier Part No: EPS Kit Weight: 3 kg Data Sheet X1 BOX EPS

Read more less

Part No: SOL-S5-GR3P-20K-DC Inverters - Main Units Rating: 20,000W Phases: 3 Series 5 GR3P Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.7%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 16A PV string input x 4 Maximum AC output power of 22kW  Max PV DC Power of 30kW Integrated AFCI (DC arc-fault circuit protection) IP66 Rated  DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. NRS-097-2-1 Certified This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems. Supplier Part No: SOL-S5-GR3P-20K-DCWeight: 22.94 kgRated Power: 20,000 WMin PPT Voltage: 180 VMax PPT Voltage: 1,000 VDC Startup Voltage: 180 VDC Shutdown Voltage: 160 VMax Input Voltage: 1,100 VMax DC Power: 30,000 WMax AC Power (5 Minutes): 22,000 WSurge AC Power (1 Second): 22,000 WMax DC Current: 64 AMax DC Inputs: 4Has DC Fuses: 0Connector: MC4 Included Connectors: 8Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity :2Has Integrated DC Switch: YesWarranty: 5 years Click Here For Specs 

Read more less

Cut your costs with smart green energy solutions. With GivEnergy technology, you can power your home or business cheaply and sustainably. Become part of a cleaner world. With GivEnergy batteries installed, you can: - Store energy from the grid, solar, wind, or hydro - Use that stored energy to power your home - Avoid high peak charges, outages, and grid dependence   This part is made up of the following items: 1 x  GivEnergy 5.2kWh Li-Ion Battery   1 x  GivEnergy 1PH Hybrid Inverter 5.0kW 3rd Generation   1 x  GivEnergy Lug to Plug + Grommet for 2.6, 5.2 and 8.2 batteries with G3   1 x  GivEnergy Single Phase Energy Meter with CT   1 x  GivEnergy Battery Isolator 100A DC MCB   1 x  GivEnergy PE Bonding Kit for Gen3 Hybrid Inverters

Read more less

Growatt's ML33RTA battery has single unit capacity of 3.3kWhwith high energy density and efficiency utilising cobalt free LiFePO4 increasing system safety.They can be paralleled up to a maximum of 6 providing 19.8kWh of energy storage that can be easily installed.

Read more less

CLICK HERE FOR SPEC SHEETS The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.   Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.   Brand Victron Energy Manufacturer Part Number PMP123021010 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

Read more less

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.   Features Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.  Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.  Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC125085411 GTIN 8719076050896 Battery Voltage 12/24/48V Auto Select (36V: manual) Rated Charge Current 85A Nominal PV Power, 12V 1200W Nominal PV Power, 24V 2400W Max. PV Short Circuit Current 70A Maximum PV Open Circuit Voltage 250V absolute maximum coldest conditions | 245V start-up and operating maximum Efficiency 99% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Can, VE.Direct and Bluetooth IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

Read more less

MEGA-fuse 60A/32V (package of 5 pcs) Brand Victron Energy Manufacturer Part Number CIP136060010 Warranty 5 Years Appr. Voltage Drop 120 mV Cold Resistance 1.5    

Read more less

ANL-fuse 400A/80V for 48V products (1 pc)   Brand Victron Energy Manufacturer Part Number CIP142400000 Appr. Voltage Drop 125 mV Cold Resistance 0.3 Warranty 5 Years

Read more less

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.   Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programming, real-time data and history display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.  CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC010015050R GTIN 8719076025320 Battery Voltage 12/24V Auto Select Rated Charge Current 15A Nominal PV Power, 12V 220W Nominal PV Power, 24V 440W Max. PV Short Circuit Current 15A Maximum PV Open Circuit Voltage 75V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

Read more less

 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.   MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. Load output The intelligent Load output function prevents damage caused by running batteries ‘flat’. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here’s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can’t – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.  CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC075015060R GTIN 8719076040804 Battery Voltage 12/24 Auto Select Rated Charge Current 15A Nominal PV Power, 12V 220W Nominal PV Power, 24V 440W Max. PV Short Circuit Current 15A Maximum PV Open Circuit Voltage 75V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

Read more less

Part No: FE-H1-6.0 Storage Systems - Hybrid Inverter The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% The FoxESS inverters can be configured with the following batteries: 1 x ECM-2900 (Master) + 2-5 x ECS-2900 (Slave) 1 x ECM-4100 (Master) + 2-5 x ECS-4100 (Slave) CT Clamps and WiFi stick are included in the box. A second CT will be required if there's another generator set (i.e PV, wind or other). Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. Weight: 35.45 kg Rated Power: 6,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 7,800 W Max AC Power (5 Minutes): 6,600 W Surge AC Power (1 Second): 7,800 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years Data Sheet H1AC1-3-6-EN

Read more less

Part No: X3-HYBRID-G4-10.0-V2 Storage Systems - Hybrid Inverter High-efficient 150% PV oversized and 110% overload output Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking functio Economic Maximum 16A DC input current, support for high power solar panel Store the surplus energy from PV to battery Low start output voltage makes inverter longer working time Less energy loss on battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid G4 10.0 V2 with Wi-Fi & CT Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 0 Has Integrated DC Switch: No Data Sheet X3 G4

Read more less

BAT-10K1PS0B-02 Compatible with all models of SolarEdge single phase HD wave inverters including both Home wave and Home hub. Integrates with the complete SolarEdge residential offering, providing a single point of contact for warranty, support, training, and simplified logistics & operations. NMC 9.7kWh / 5kW Li-ion technology DC coupling Support up to 3 batteries per inverter for more power and capacity 100% depth of discharge Superior system efficiency (PV> Battery> Grid) Simple installation with plug & play: Floor mounting or wall mounting Automatic configuration with pre-defined settings All SolarEdge solutions are managed by a single APP to optimize production, consumption and stored energy Through improvements in its mechanical design, SolarEdge were able to design their new battery to certify with the UL9540A standard, on top of the existing IEC62619 EU, making it one of the first residential batteries to meet the strictest standards for fire safety hazards. The installation has been simplified and the package no longer contains a fire extinguisher. Please refer to the other parts section and review any other products you may require for this installation. Please contact us if you have any questions. Please note installers must be trained and certified in order to install this battery. Installer certification course is available in the Solar Edge Edge Academy.   Supplier Part No: BAT-10K1PS0B-02 Weight: 120 kg Battery Type: Lithium Ion Nominal Energy: 9700 Wh Depth of discharge: 100.00 % Voltage: 400 V Continuous Discharge Rate (Normal Use): 5000 W Maxi um Discharge Rate (5 Minutes): 5000 W Surge Discharge Rate (15 Seconds): 7500 W Maximum Charge Rate (5 Minutes): 5000 W Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. 

Read more less

7 units in stock for next day delivery Part No: SUN5KTL-L1 Storage Systems - Hybrid Inverter Huawei Fusion Home SUN2000L1 - 3/ 3.68 / 5 /6KTL The Smart Energy Controller (SUN2000- 3 / 3.68 / 5 / 6KTL-L1) is Huawei new single-Phase inverter and is direct compatible with their own Huawei Luna battery Product Features Direct compatible with Luna battery and is Plug and Play and no extra devices is needed AI Self leaning new arc detection Is compatible with the Sun2000-450W-P optimizer Simple commissioning by APP Auto-detection of system equipment Registering your plant by scanning any device Energy Flow illustration Real-time data at anytime and anywhere Performance data back-up Physical & logical module layout Module -level performance monitoring Smart I-V Diagnosis Smart dongle Plug and Play (LAN or 4G dongle available) Smart dongle support up to 10 inverters IP65 Can be installed without batteries as 'battery ready' Max 3 batteries per inverter Supplier Part No: 01075346 Weight: 12 kg Rated Power: 5,000 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,250 W Surge AC Power (1 Second): 5,500 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet Huawei L1  

Read more less

  Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.FeaturesVE.Direct communication portThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)   Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms       Proven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.DC connection with screw terminals No special tools needed for installation.   GTIN 8719076055044 Voltage 12V Cont. output power at 25°C 500VA Peak Power 900W Output AC Voltage 230V Efficiency 90% Bluetooth Enabled No Plug Type UK Protection Category IP21 Dimensions H86 x W172 x D275mm Weight 13.9Kg Warranty 5 Years Country of Manufacture China

Read more less

Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Part No: SOL-2.5-MINI-S6-DC Inverters - Main Units Rating: 2,500W Phases: 1 The All New Solis Mini 6S Series Grid-tie Inverter. Compact and lightweight design, for easy installation. Fanless, minimal noise, producing less than 20 dBA. Compatible with high-efficiency modules and bi-facial modules. Product Features Super high frequency switching technology with maximum efficiency of 97.1% Max PV Power of 3.8kW DRM (Demand Response Mode) integrated and backflow power control function for smart grid requirements. Wide voltage range - Ultra low start-up voltage of 90V and max PV input voltage of 600V Integrated Export Power Manager (EPM) Integrated AFCI (DC arc-fault circuit protection) Integrated DC switch for emergency shut-down of PV power or safe PV maintenance 5-year standard warranty   Supplier Part No: S6-GR1P2.5K-M-DC Weight: 7.7 kg Rated Power: 2,500 W Min PPT Voltage: 90 V Max PPT Voltage: 500 V DC Startup Voltage: 90 V DC Shutdown Voltage: 80 V Max Input Voltage: 600 V Max DC Power: 3,800 W Max AC Power (5 Minutes): 2,750 W Surge AC Power (1 Second): 2,750 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 1 Euro Efficiency: 96.7 % Transformer: None MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years   Data Sheet S6-GR1P(0.7-3.6)K-M

Read more less

 Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

PLEASE INQUIRE IN STOCK Part No: SOL-4.6K-RHI-48ES-5G-DC Storage Systems - Hybrid Inverter Solis new 5G Hybrid inverter range that support power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.  Product Features Fanless design IP65 High charge and discharge efficiency Multiple work modes resulting in max self-consumption Intelligent  BMS function 24 hour real-time intelligent energy management  Remotely control & upgrade Supplier Part No: S5-EH1P4.6K-L Weight: 21 kg Rated Power: 4,600 W Min PPT Voltage: 120 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 8,000 W Max AC Power (5 Minutes): 5,060 W Surge AC Power (1 Second): 5,520 W Max DC Current: 27.52 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 96.8 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Solarcable L=5m/4sqmm MC4-M/F Connection Brand Victron Energy Manufacturer Part Number SCA000500000 Warranty 5 Years

Read more less

Part No: SUN3.68KTL-L1 Storage Systems - Hybrid Inverter Huawei Fusion Home SUN2000L1 - 3/ 3.68 / 5 / 6KTL The Smart Energy Controller (SUN2000- 3 / 3.68 / 5 / 6KTL-L1) is Huawei new single-Phase inverter and is direct compatible with their own Huawei Luna battery Product Features Direct compatible with Luna battery and is Plug and Play and no extra devices is needed AI Self leaning new arc detection Is compatible with the Sun2000-450W-P optimizer Simple commissioning by APP Auto-detection of system equipment Registering your plant by scanning any device Energy Flow illustration Real-time data at anytime and anywhere Performance data back-up Physical & logical module layout Module -level performance monitoring Smart I-V Diagnosis Smart dongle Plug and Play (LAN or 4G dongle available) Smart dongle support up to 10 inverters IP65 Can be installed without batteries as 'battery ready' Max 3 batteries per inverter Supplier Part No: 01075349 Weight: 12 kg Rated Power: 3,680 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 5,520 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Data Sheet Huawei L1

Read more less

  Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.FeaturesVE.Direct communication portThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)   Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms       Proven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.DC connection with screw terminals No special tools needed for installation.   GTIN 8719076054948 Voltage 12V Cont. output power at 25°C 1200VA Peak Power 2200W Output AC Voltage 230V Efficiency 91% Bluetooth Enabled No Plug Type UK Protection Category IP21 Dimensions H117 x W232 x D362mm Weight 7.4Kg Warranty 5 Years Country of Manufacture China

Read more less

Part No: FE-H1-5.0 Storage Systems - Hybrid Inverter The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Uses high voltage batteries IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% CT Clamps, meter and WiFi stick are included in the box   Supplier Part No: H1-5.0 (with EPS) Weight: 35.45 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 6,500 W Surge AC Power (1 Second): 7,200 W Max DC Current: 27 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

6 UNITS IN STOCK Part No: SOL-RHI-3P5K-HVES-5G-DC Storage Systems - Hybrid Inverter This is the perfect three phase hybrid solution for medium to large houses and business use as well.  Product features 2 x MPPT and 4 DC input at max of 26A 3 x operation modes Self-consumption; time of use; off-grid backup 4 models range from 5KW to 10 KW output as well as backup Supporting Li-ion high voltage batteries ranging from 160 to 600VDC Time of use shifting peak shaving capabilities to grid Intelligent EMS function Supporting three-phase imbalance 24-hour monitor and management system Remotely control and upgrade any selected inverter Supplier Part No: Solis-RHI-3P5K-HVES-5G-DC Weight: 25.1 kg Rated Power: 5,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 8,000 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 6,000 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.7 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet English

Read more less

This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Supplier Part No: X1 G4- Hybrid 5.0 D with Wi-Fi Weight: 24 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years  

Read more less

Part No: GIV-HY-3.6-G3 Storage Systems - Hybrid Inverter GivEnergy Hybrid Inverter 3.6kW Gen 3  The third generation of the GivEnergy Hybrid Inverter is a battery and solar inverter in one unit PLEASE NOTE: AN EARTH BONDING KIT IS REQUIRED WITH EVERY GEN 3 INVERTER. THIS IS NOT INCLUDED AND MUST BE ADDED SEPARATELY. It can be coupled directly with solar panels to generate usable electricity in the property as well as store any excess energy for later use in a battery. The Hybrid Inverter aims to minimise export by storing excess energy in the battery during generation hours. Additionally, it will minimise import by discharging to meet demand in the property Spec MPPT Range 120V - 550V Max. Short Circuit Current (per string) 20A Max. Input Current (per string) 15A MPPT Tracker / No. of Strings per MPPT Tracker 2/1 Features  In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 5 Year Warranty Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services PLEASE NOTE: We are still awaiting additional documents from the manufacturer. These will be uploaded as soon as received.

Read more less

4 UNITS IN STOCK Part No: SOL-3K-RHI-48ES-5G-DC Storage Systems - Hybrid Inverter Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.  Product Features -Fanless design IP65 -High charge and discharge efficiency -Multiple work modes resulting in max self-consumption -Intelligent  BMS function -24 hour real-time intelligent energy management  -Remotely control & upgrade Certifications and documents pending Supplier Part No: S5-EH1P3K-L Weight: 17 kg Rated Power: 3,000 W Min PPT Voltage: 90 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,300 W Surge AC Power (1 Second): 3,600 W Max DC Current: 11 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 96.8 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world.  Data Sheet Solis RHI 1Ph 5G English

Read more less