Photovoltaic
Powerland GivEnergy Smart Plug
Part No: GIV-SP-16-2.4-TC-01 Accessories - Smart Plugs GivEnergy Smart Plug 16A Smart Plug with Energy Monitoring Power and Energy Breakdown WiFi Controlled Model Number: GIV-SP-16-2. 4-TC-01 Working Temp: -10 ~ 60°C WiFi Requirements: 2.4 GHz Only Input Voltage: 230V AC 50Hz - 60Hz Rated Current: 16A Max Max Power: 3680W Supplier Part No:GIV-SP-16-2.4-TC-01 Weight:0.082 kg
£8.31 Exc. VAT
£9.97 Inc. VAT
Powerland myenergi eddi 2.1 - Energy Diverter (wifi enabled)
Part No: MYEN-EDDI-16A1P02H Accessories - Immersion Controllers eddi 2.1 Eco-Smart Energy Diverter Internet connected & remote controllable, Works with heat pumps (when used with optional Relay & Sensor Board), 3 Year Warranty eddi Feautures: 3.68kW / 16A max heater load Expansion module option – 2 extra outputs with temperature control Integral bypass switch Graphical back-lit LCD screen for ease of use Fan-less cooling Built-in programmable boost timers VariSineTM PWM technology Supports two heaters (sequentially) Wall mounting bracket for ease of installation Overload and short-circuit protection Ethernet port and built-in WiFi for connecting to the internet Complies with CE and UKCA Requirements Works alongside battery storage systems Energy monitoring on the go via the myenergi app
£315.00 Exc. VAT
£378.00 Inc. VAT
Powerland SolarEdge Home Hot Water Controller, 5kW
Part No: SMRT-HOT-WTR-50-S2 Accessories - Immersion Controllers SolarEdge Home Hot Water Controller - 5kW SMRT-HOT-WTR-50-S2 Maximizes self-consumption by storing excess solar energy as hot water Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamline logistics & operations. Automatically adjusts power supplied to the heater, using any amount of available PV power (up to 5.0kW). Wireless communication to the inverter using SolarEdge Home Network, reducing wiring, labor, and installation faults. Built-in water tank power consumption meter. Simple wall mount installation. Suitable for powering purely resistive loads only. Optional temperature sensor for optimized heating. Supplier Part No: SMRT-HOT-WTR-50-S2 Weight: 5.3 kg
£406.50 Exc. VAT
£487.80 Inc. VAT
Powerland SolarEdge Home Hot Water Controller, 3kW
Part No: SMRT-HOT-WTR-30-S2 Accessories - Immersion Controllers SolarEdge Home Hot Water Controller - 3kW SMRT-HOT-WTR-30-S2 Maximizes self-consumption by storing excess solar energy as hot water Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamline logistics & operations. Automatically adjusts power supplied to the heater, using any amount of available PV power (up to 5.0kW). Wireless communication to the inverter using SolarEdge Home Network, reducing wiring, labor, and installation faults. Built-in water tank power consumption meter. Simple wall mount installation. Suitable for powering purely resistive loads only. Optional temperature sensor for optimized heating. Supplier Part No: SMRT-HOT-WTR-30-S2 Weight: 5.3 kg
£357.00 Exc. VAT
£428.40 Inc. VAT
Powerland SolarEdge Floor Stand Kit for Home Battery 400V
Part No: IAC-RBAT-FLRSTD-01 Accessories - DC Battery Storage Floor stand kit for SolarEdge Energy Bank to allow floor mounting of the battery Supplier Part No: IAC-RBAT-FLRSTD-01 Weight: 18 kg
£313.00 Exc. VAT
£375.60 Inc. VAT
Powerland SolarEdge Home Network - Home Wave Inverter with Display
Part No: ENET-HBPV3D-01 Accessories - DC Battery Storage SolarEdge Energy Net for Home Wave inverters with Display, includes comms board (HD Wave SetApp with display). For the older SolarEdge Home Wave Inverter with LCD or SolarEdge part codes SExxxxH-RWxxxNxxx. Supplier Part No: ENET-HBPV3D-01 Weight: 0.3 kg
£196.90 Exc. VAT
£236.28 Inc. VAT
Powerland SolarEdge Home Network - Home Wave (APP) Inverter Cellular Modem
Part No: ENET-HBPV3-01 Accessories - DC Battery Storage SolarEdge Energy Net for HD-Wave inverters with Cellular (Home Wave Cellular) SolarEdge Home Wave Inverter with SetApp partcodes ending with APP, or SolarEdge codes SExxxxH-RW0xxBNxx Supplier Part No: ENET-HBPV3-01 Weight: 0.3 kg
£133.80 Exc. VAT
£160.56 Inc. VAT
Powerland SolarEdge Home Network - StorEdge Inverters (RWS), inc. Comms Board
Part No: ENET-HBPV3S-01 Accessories - DC Battery Storage SolarEdge Energy Net for StorEdge HD-Wave inverters and Home Battery 48V, includes comms board. For the StorEdge Single Phase Inverter part codes ending with RWS, or SolarEdge part number SExxxxH-RWSxxBNxx Supplier Part No: ENET-HBPV3S-01 Weight: 0.3 kg
£129.30 Exc. VAT
£155.16 Inc. VAT
Powerland SolarEdge Smart Energy Relay
Part No: SEHAZB-DR-SWITCH-2 Accessories - Smart Plugs ZigBee wireless switch that controls loads through a control interface, such as smart grid-ready supported heat pumps. Capable of controlling two devices. Smart Energy Relay - Dry Contact Switch · Wireless Energy Relay (dry contact switch) for controlling electrical devices · Suitable for heat pump control · Supports a wide input voltage range Please note this part requires the following Solar Edge parts to work: Solar Edge Smart Energy Device Control ZigBee Plug-in Module, Solar Edge Split- Core Current Transformer, Solar Edge Modbus Meter. Supplier Part No: SEHAZB-DR-SWITCH-2 Weight: 0.18 kg
£87.90 Exc. VAT
£105.48 Inc. VAT
Powerland SolarEdge Smart Energy Socket
Part No: SEHAZB-SCKT-MTR-GB Accessories - Smart Plugs Smart Energy Socket GB - Plug-In Socket with Meter · Wireless zigbee Smart Energy AC switch for controlling electrical devices · Device control can be done remotely according to a pre-configured schedule or dynamically by the inverter for maximized self-consumption · Built-in energy and power consumption metering · Provides power measurements up to 3kW Suitable for UK. Please note this part requires the following Solar Edge parts to work: Solar Edge Smart Energy Device Control ZigBee Plug-in Module, Solar Edge Split- Core Current Transformer, Solar Edge Modbus Meter. Supplier Part No: SEHAZB-SCKT-MTR-GB Weight: 0.195 kg
£83.30 Exc. VAT
£99.96 Inc. VAT
Powerland SolarEdge Handles for Manoeuvring Home Battery 400V
Part No: IAC-RBAT-HANDLE-01 Accessories - DC Battery Storage Handles for handling, manoeuvring and carrying of the SolarEdge Energy Bank battery Can be used for several installations. 4 handles per PN Supplier Part No: IAC-RBAT-HANDLE-01 Weight: 0.001 kg
£68.78 Exc. VAT
£82.54 Inc. VAT
Powerland SolarEdge Zigbee Module for Home Energy Management ( Set APP )
Part No: SE-ZBSLV-B-S1-RW Accessories - Smart Plugs Wireless Smart Energy Solution ZigBee plug-in supports Smart Energy applications in Inverters with SetApp configuration Functions as Smart energy network manager ZigBee Plug-in supports up to 10 Smart Energy devices Antenna external to inverter for wider range ZigBee Plug-in installed within the inverter enclosure for outdoor resilience Supplier Part No: SE-ZBSLV-B-S1-RW Weight: 0.25 kg
£49.60 Exc. VAT
£59.52 Inc. VAT
Powerland SolarEdge Home Network - SetApp Inverters
Part No: ENET-HBCL-01 Accessories - DC Battery Storage SolarEdge Energy Net for Home Wave SetApp inverter. (can be used when the inverter is not using cellular or zigbee device) The new ENET comms plug in for SetApp inverters with SolarEdge Home Battery installations. Use this for retrofit installations when adding a Home battery to an existing Home Wave Set App inverter, or for new installs with a Home Wave SetApp inverter (HD Wave SetApp no display). Supplier Part No: ENET-HBCL-01 Weight: 0.3 kg
£37.37 Exc. VAT
£44.84 Inc. VAT
Powerland SolarEdge Home Network - ENET Ready Inverters
Part No: ENET-HBNP-01 Accessories - DC Battery Storage SolarEdge Home Network Wireless Mesh Network Model: ENET One communication platform for seamless device connection within the SolarEdge Smart Energy Management ecosystem. Supplier Part No: ENET-HBNP-01 Weight: 0.1 kg
£31.00 Exc. VAT
£37.20 Inc. VAT
Powerland SolarEdge Branch Connectors for Home Battery 400V
Part No: IAC-RBAT-RWYCBL-01 Accessories - DC Battery Storage Branch connectors for parallel connection of multiple SolarEdge Energy Bank batteries. 1x pair - 1x male and 1x female Supplier Part No: IAC-RBAT-RWYCBL-01 Weight: 0.25 kg
£23.44 Exc. VAT
£28.13 Inc. VAT
Powerland PVC Coated Solar Mesh Bird Deterrent Kit - 30m, Galvanized Mesh
Part No: BIRD-MESH Accessories - Bird Protection Enviroguard's BIRD-MESH kit is a PVC coated mesh solution that uses clips to connect it to the frame of the module. It’s more permanent and safer than nylon pigeon netting in which birds can get trapped when it degrades, and the initial outlay is balanced out by lower maintenance costs as it's easier to remove and refit during routine inspections. Installation: The clips are connected, and the mesh moulded onto the frames using the clips as fixing points. It’s quick, simple, and easy to install. This method has historically been the more widespread solution, but it is more visible and not suitable for modules with a ‘short-frame/SM’ design. Kit comprises 30 Meter Galvanised Solar Panel Weld Mesh Roll 60 Solar Panel Mesh Clips 1 Standard Wire Cutter 1 Pack Stainless Steel Corner Ties Supplier Part No: 30M_BIRD_EXCL_KIT Weight: 7.565 kg
£208.70 Exc. VAT
£250.44 Inc. VAT
Powerland PVC Coated Solar Mesh Bird Deterrent - 30m Roll with 100 Clear Clips
Part No: BIRD-MESH-BLK-PACK Accessories - Bird Protection This part is made up of the following items: 1 x BIRD-MESH-BLK PVC Coated Solar Mesh Bird Deterrent - 30m roll 100 x EG-FASTEN-CLIP SolarGuard Spike Fixing Clip 30mm - Clear Package Including 30m Solar Panel Bird Exclusion Mesh and 100 30mm Fixing Clips. Galvanized mesh to prevent bird nesting 30 Meter roll PVC Coated Galvanised Welded Mesh 25 mm X 12.5mm openings on a 200mm X 30m roll This mesh is the correct size to fit our solar panel mesh clips (WM132) Handy 200mm wide roll, saves time and cost in cutting down wider rolls of mesh The solar panel mesh clip holds the weld mesh securely against the solar panel to deter bird entry Manufactured from: 16 gauge / 1.5 mm diameter hot dipped galvanised wire then pvc coated in black These brand new and revolutionary clips make applying solar panel proofing spikes quicker and easier than ever! These clips simply clip on to the side of the solar panel frame and hold the spike system securely in place. Remove warranty conflicts as there is no drilling into the panel frame. Weight: 17.565 kg
£115.50 Exc. VAT
£138.60 Inc. VAT
Powerland Outsunny Canopy: Weather protection for Batteries or Inverters
Part No: OTS-CANOPY Accessories - Weather Protection WEATHER-RESISTANT: Protect outdoor installed units such as Inverters or Batteries from glaring sun and light-medium rain, UV RESISTANT: Shields outdoor unit against harmful rays and glaring sun thanks to the surface coating. SIMPLE DESIGN: Suitable for all home and outdoors area main unit installations ACCESSORIES INCLUDED: All necessary hardware included. For fitting on cement walls only. DIMENSIONS: 230H x 1000L x 800Wmm. Wall bracket: 230H x 750Lmm. Supplier Part No: B70-051V01 Weight: 2.4 kg
£49.60 Exc. VAT
£59.52 Inc. VAT
Powerland Relay and Sensor Board for myenergi eddi
Part No: MYEN-EDDI-RLYBD Accessories - Immersion Controllers eddi has the option to install a Relay & Sensor board which allows for many different wiring configurations and includes the following features: Two independent multi-function relays (16Amp) eSense input (isolated 230V detection for low tariff etc.) Two temperature sensor inputs (PT1000) The two relays can be independently set for several different functions, or they can be set to operate as a pair. The relay functions include: – Export Threshold – Import Threshold – Operate when heating – De-stratification pump control – Timed operation – Fault signal for BMS systems Please refer to the eddi manual for fitting diagrams. Supplier Part No:MYEN-EDDI-RLYBD Weight:0.5 kg
£49.25 Exc. VAT
£59.10 Inc. VAT
Powerland Q-Cable round 3Phase AC Branch Terminator (1 Item)
Part No: EN-Q-TERM-3P Accessories - Cable termination caps Enphase round Q Cable 3 phase Terminator cap for unused cable ends - required to terminate each 3 phase circuit. Single item only. Supplier Part No:Q-TERM-3P Weight:0.28 kg
£12.00 Exc. VAT
£14.40 Inc. VAT
Powerland Q-Cable round AC Branch Terminator (1 Item)
Part No: EN-Q-TERM-R Accessories - Cable termination caps Enphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit. Single item only. Supplier Part No:EN-Q-TERM-R Weight:0.025 kg
£10.32 Exc. VAT
£12.38 Inc. VAT
Powerland Bird Deterrent 30m Solar Panel Bird Exclusion Kit (Galvanized Mesh)
Part No: BIRD-MESH Accessories - Bird Protection 30m Solar Panel Bird Exclusion Kit Galvanized Mesh To Prevent Bird Nesting Use this kit to prevent pigeons and other birds seeking shelter and roosting underneath solar panels. Enviroguard Bird Mesh is more permanent and safer than nylon pigeon netting in which birds can get trapped when it degrades. The initial outlay is balanced out by lower maintenance costs as it's easier to remove and refit during routine inspections. Features: Recommended by Pest Control Experts Prevents birds nesting Technical 30 Meter Galvanised Solar Panel Weld Mesh Roll 60 Solar Panel Mesh Clips 1 Standard Wire Cutter 1 Pack Stainless Steel Corner Ties Keywords: Birds, Nesting, Bird Mesh Supplier Part No:30M_BIRD_EXCL_KIT Weight:7.565 kg
£164.20 Exc. VAT
£197.04 Inc. VAT
Powerland Bird Deterrent 30 Meter Roll PVC Coated Solar Mesh
Part No: BIRD-MESH-BLK Accessories - Bird Protection 30m Solar Panel Bird Exclusion Mesh Galvanized Mesh To Prevent Bird Nesting 30 Meter roll PVC Coated Galvanised Welded Mesh 25 mm X 12.5mm openings on a 200mm X 30m roll This mesh is the correct size to fit our solar panel mesh clips (WM132) Handy 200mm wide roll, saves time and cost in cutting down wider rolls of mesh The solar panel mesh clip holds the weld mesh securely against the solar panel to deter bird entry Manufactured from: 16 gauge / 1.5 mm diameter hot dipped galvanised wire then pvc coated in black Note: Optional BORD-MESH-CLIPS Supplier Part No:BIRD-MESH-BLK Weight:7.565 kg
£64.70 Exc. VAT
£77.64 Inc. VAT
Powerland BIRD-MESH Packs of 10 clips
Part No: BIRD-MESH-CLIPS Accessories - Bird Protection These clips work for the SolarSpikes (EG-SPIKE-GUARD-130) as well as the Bird Mesh (BIRD-MESH-BLK) Supplier Part No:Mesh Clips Weight:0.002 kg
£15.03 Exc. VAT
£18.04 Inc. VAT
Powerland Solarguard 130mm Adjustable Solar Spike
Part No: EG-SPIKE-GUARD-130 Accessories - Bird Protection Adjustable – The total spike length before trimming is 130mm and can be adjusted easily with a set of wire cutters. Stainless steel spikes with a UV resistant polycarbonate base. Simple to install on panels that do not have the traditional lip on the underside edge. Ideal for installations on uneven roofs or profiled tin clad roofs. Bond to the panels with soudal high module soudal Crystal adhesive, located in adhesives. Supplier Part No:EG-SPIKE-GUARD-130 Weight:0.5 kg
£7.17 Exc. VAT
£8.60 Inc. VAT
Powerland SolarGuard Spike Fixing Clip 35mm - Clear
Part No: EG-FASTEN-CLIP-35 Accessories - Bird Protection These brand new and revolutionary clips make applying solar panel proofing spikes quicker and easier than ever! These clips simply clip on to the side of the solar panel frame and hold the spike system securely in place. Remove warranty conflicts as there is no drilling into the panel frame Available in 30mm & 35mm sizes to suit most solar panel frames. We recommend 6 clips for every 1M of spike purchased. These clips work for the SolarSpikes (EG-SPIKE-GUARD-130) as well as the Bird Mesh (BIRD-MESH-BLK) Supplier Part No:EG-FASTEN-CLIP-35 Weight:0.1 kg
£0.52 Exc. VAT
£0.62 Inc. VAT
Powerland SolarGuard Spike Fixing Clip 30mm - Clear
Part No: EG-FASTEN-CLIP Accessories - Bird Protection These brand new and revolutionary clips make applying solar panel proofing spikes quicker and easier than ever! These clips simply clip on to the side of the solar panel frame and hold the spike system securely in place. Remove warranty conflicts as there is no drilling into the panel frame Available in 30mm & 35mm sizes to suit most solar panel frames. We recommend 6 clips for every 1M of spike purchased. These clips work for the SolarSpikes (EG-SPIKE-GUARD-130) as well as the Bird Mesh (BIRD-MESH-BLK) Supplier Part No:EG-FASTEN-CLIP-30 Weight:0.1 kg
£0.52 Exc. VAT
£0.62 Inc. VAT
