Solar Panel Fitting & Mounting Kits

Part No: REN-420082-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420082-BE Weight: 0.06 kg Clip Type: 199 Clip H: 51 mm Clip B1: 10.8 mm Clip Colour: Black

Read more less

Part No: REN-420081-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081-BE Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Black

Read more less

Part No: REN-400531 Mounting - Rail Connectors Technical Data: Dimensions: 195 x 24,1 x 30 Weight: 0.151kg Rail Length: 195,0mm Material: Aluminium Certification: TUV ID:48970; MCS012 IK0197/03 Useable with: VS+ Mounting rail 41 x 35mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400531 Weight: 0.15 kg

Read more less

Part No: ER-C-U30-46-B Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: CU30-46-B Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Black

Read more less

Part No: ER-R-PRO-3500 Mounting - Mounting Rails The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers

Read more less

Part No: REN-900245-B Mounting - Rail End Caps End cap for VarioSole + 41x35 rail, black   Supplier Part No: 900245 Weight: 0.05 kg

Read more less

Part No: REN-400525 Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range. Now supplied in longer, 4.4m lengths.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400525 Weight: 3 kg Length: 4.4 m

Read more less

Part No: REN-420182 Mounting - Roof Anchor- Tile & Slates Renusol have created this roof hook specifically for the UK market. It is compatible with S-Shaped, Modern interlocking, Flat and Slate tiles, and can be used with the VarioSole product range.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420182 Weight:0.96 kg

Read more less

Part No: DNLS10MB Mounting - Cable Flashings Don't risk roof leaks and system failure through cable damage by pushing unprotected cables under the tiles or slates. The MCS Installation Guide for PV requires that "cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The use of a purpose made product is a durable means to achieve this". [p.75] The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects the cables from compression or damage from contact with roofing materials. Dektite Multicable DNLS10MB  * Purpose made product as per MCS  * Universal - fits all types of tile and slate roofs  * Quick and easy to instal - only tool needed cable snips  * Nu-Lead base [acrylic coated lead] for perfect dressing with profiled tiles. Safe handling, no staining.  * Base size 490 x 410mm, easily cut down if necessary  * Dektite quality EPDM seal protects up to 10 cables from compression or damage by isolation from contact with roofing materials  * Durable product backed by 20 year warranty and Deks 50 years experience in design and manufacture of roof flashings.   Supplier Part No:DNLS10MB Weight:2.69 kg

Read more less

Part No: EM-ECA2-BI Meters - Single Phase BiDirectional Generation Meters Emlite Single Phase Bi-Directional (Import/Export) Total Generation Meter 100A with Pulse Output Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values.    NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.  This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’  document released by OFGEM.   Part Code: ECA2.nz Important This is a bi-directional generation meter for hybrid inverters, please delete standard generation meter from your order if using this.  Supplier Part No: ECA2NET ETC Weight: 1.22 kg

Read more less

Part No: ER-SP-ST Mounting - Rail Connectors The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers

Read more less

Part No: REN-400524 Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range. Now supplied in longer 3.3m lengths.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 400524 Weight: 2 kg Length: 3.3 m

Read more less

Part No: REN-900246 Mounting - Rail End Caps Technical Data Material Dimensions Weight Compatible Components Average thicknesss 2,00 mm Colour: grey   41 x 35 x 15 mm 0,007 kg 400511, 400511-B, 400512, 400512-B, 400513, 1 x End cap (grey)     Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900246 Weight: 0.004 kg

Read more less

Part No: REN-900318-100 Mounting - Wood Screws Wood screw pan head 6mm x 80mm SIT30  Bag of 100 Material - Stainless steel Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 900318-100 Items in this pack: 100 Weight: 0.9 kg  

Read more less

Part No: FLAT-REN-GEN-V Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x  Roof hook UK Plain tiles/slates (without wood screw)   1 x  UK M8 Bracket 90°   1 x  Genius Roof - Flat Tiled Kit   Renusol plain roof anchor with Genius Roofing flat tile kit. This part contains:  - 1 x REN-420181 - 1 x GEN-FT-TILE - 1 x REN-420352   Weight: 0.97 kg

Read more less

Part No: REN-400524-B Mounting - Mounting Rails Technical Data Material Dimensions Weight Compatible Black Anodised Aluminium 41 x 35 x 3300 mm 1#9 kg 420081, 420081-B, 420082, 420082-B   Renusol Black Mounting Rail, to be used with the VarioSole product range.   Supplier Part No:400524-B Weight:2 kg Length:3.3 m

Read more less

Part No: ER-I-PRO-02 Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers

Read more less

Part No: REN-900001 Mounting - Fixings Hexagon Flange Nut With Serration Supplier Part No: 900001 Weight: 0.007 kg

Read more less

Part No: REN-900007 Mounting - Fixings Hammerhead bolt M8x25 Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 900007 Weight: 0.018 kg

Read more less

Part No: REN-420081 Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081 Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Silver

Read more less

Part No: REN-400532 Mounting - Rail Connectors Technical Data: Dimensions: 195 x 27,9 x 38,8mm Weight: 0.193kg Rail Length: 195,0mm Material: Aluminium Certification: TUV ID:48970; MCS012 IK0197/03 Useable with: VS+ Mounting rail 50 x 37mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Supplier Part No: 400532 Weight: 0.19 kg

Read more less

Part No: REN-420165 Mounting - Roof Anchor- Tile & Slates ROOF HOOK ECO BASIC (WITHOUT WOOD SCREW) Size: 150x180x170 mm Weight: 0,55 kg Set pre-assembled Dimensions base plate: 50 x 150 mm Material: Galvanised steel Material thickness: 5,0 / 4,0 mm Hammerhead Bolt Ø: M8   Applicable with: Wood Roof decking: Tiled roof No of screws: 2/3 x 6,0 Horizontal adjustment: 60,0 mm Height adjustment: 37,50 mm   Duration of protection Zinc coating according to EN ISO 14713-1:2017 Zinc coating Duration of protection in Corrosion category C3 (medium con­tamination or light chloride load): 26-78 years   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No:420165 Weight:0.54 kg

Read more less

Part No: REN-400525-B Mounting - Mounting Rails Renusol Mounting Rail, to be used with the VarioSole product range. Supplier Part No: 400525-B Weight: 3 kg Length: 4.4 m

Read more less

Part No: SLT-131121-001 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131121-001 Weight: 0.049 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver  

Read more less

Part No: SLT-129002-002 Mounting - Rail Connectors Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled Important Replaced by SLT-129060-000 for SA. Ersetzt durch SLT-129060-000 für SA. Supplier Part No: 129002-002 Weight: 0.17 kg

Read more less

Part No: SLT-131101-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-001 Weight: 0.04 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: ER-I-PRO-01A Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers   Supplier Part No:ER-I-PRO/01A Weight:0.732 kg

Read more less

Part No: ER-CAP-PRO-G Mounting - Rail End Caps Supplier Part No: ER-CAP-PROG Weight: 0.006 kg

Read more less

Part No: CABLE4-1-50 Cables - DC Cables 4 mm², single-core, black, 50m NEW H1Z2Z2-K certified 50m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety.    Supplier Part No: CABLE4-1-50 Weight: 2.675 kg Length: 50 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: REN-520502 Mounting - Flat Roof Eco Ballast Set FS 2100mm Size 2100x50x40 The ballast trays REN-520501 can be optionally added to your design to accommodate a higher amount of ballast, should your particular site need it.    Note: the design tool will not calculate the required ballast weight. Renusol can provide a detailed wind loading report that shows the amount of ballast that is required per module. Please provide them with the installation and site details at: tsuk@renusol.com  Each SET Composed of: 2x 500529 Eco Ballast Rail 2100mm (size 2100x40x40) 2x 900074  Stainless Steel Cable ties 2x 900229 Self Drilling Screw 4.8x19 A2 2x 500413 Roof Protection pad 500x40x11mm for ballast set (size 500x400x11)   Supplier Part No: 520502 Weight: 2.5 kg Length: 2.1 m

Read more less

Part No: ER-CAP-PRO-B Mounting - Rail End Caps   Supplier Part No:ER-CAP-PROB Weight:0.007 kg

Read more less

Part No: ER-US-6.3-70-BW-BX Mounting - Wood Screws Self-drilling Universal Screw, Buildex 14-11 x 70 Hex Head Zips Climaseal 5 with 16 mm ABW Supplier Part No: ER-US-6.3-70-BW-BX Weight: 0.002 kg

Read more less

These standing seam roof hooks can be used to secure the mounting rails to the standing seams on a roof, such as a butler roof. Simply use a 13mm spanner to tighten the bolts on the hook and it will clamp onto the standing seam. You can then attach whatever you wish onto the 11mm slot on the top of the clamp. Needs an L bracket or cross connect to attach to the rail.

Read more less

These standing seam roof hooks can be used to secure the mounting rails to the standing seams on a roof, with a "bulb" or "concealed" seam type. You can then attach whatever you wish onto the hole on the top of the clamp. 

Read more less

Aluminium channel 2.56m long for use on sheet metal roofs. Perfect for commercial and agricultural buildings. Length 2560mm*width 30mm *height 30mm Not pre-drilled F-R2560-Mini Self-tapping sheet metal screws and rubber pads need to be purchased separately.

Read more less

These nuts sit in the profile of Fastensol rail, and can be spun unto bolts for fixing components to the rail. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

Use these for connecting roof hooks to Fastensol rail. These can also be used for attaching optimisers, microinverters or other kit to Fastensol rail. System features and specifications: T?Nut with M8*25mm bolt Material: aluminium nut & stainless steel bolt Color: silver MCS 012 certification Part number: F?TN?GS Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

Use these for connecting GSE ground mounting to Fastensol M10 rail. System features and specifications: Suitable for GSE Ground Mount only Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

These useful aluminium L-brackets can be used to secure the mounting rails to various surfaces, including sheet-metal roof surfaces, felted roofs, concrete, or mounting units for flat roofs.

Read more less

These heavy-duty 200mm hanger bolts are suitable for fixing mounting rail to metal or corrugated cement roofs with wooden supports, and come supplied with EPDM seal and two nuts, as well as a substantial steel L-bracket. The bracket locks between the upper two nuts and is height adjustable.   Not MCS certified.

Read more less

These heavy-duty 200mm hanger bolts are suitable for fixing mounting rail to metal or corrugated cement roofs with steel supports, and come supplied with EPDM seal and two nuts, as well as a substantial steel or aluminium L-bracket. The bracket locks between the upper two nuts and is height adjustable.   Not MCS certified.

Read more less

End clamps secure the solar panels to the mounting rails, and are used at the ends of the row of panels. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

Mid clamps secure two neighbouring solar panels to the mounting rails, and are used in between panels. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

End clamps secure the solar panels to the mounting rails, and are used at the ends of the row of panels. Please select the size you require from the drop down box. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

Mounting solar panels just got even simpler with this universal panel clamp from Fastensol. The clamp is spring loaded meaning that it is compatible with any panel  from 30-46mm thickness. Due to it's clever design, it is also both a mid and end clamp in one - simply rotate the head 90 degrees either way to swap between either. 80x to a small carton, 320x to a large carton.

Read more less

Mounting solar panels just got even simpler with this universal panel clamp from Fastensol. The clamp is spring loaded meaning that it is compatible with any panel  from 30-46mm thickness. Due to it's clever design, it is also both a mid and end clamp in one - simply rotate the head 90 degrees either way to swap between either. 80x to a small carton, 320x to a large carton.

Read more less

The Fastensol H-Rail Splice is used to join 2 lengths of Fastensol H-Rail together. This is a very useful component in our GSE Ground mount system which uses Fastensol H-Rail.

Read more less

Use these for long rows of rail, simply join lengths of rail using the rail splice kits. Rails can be cut to length with a hacksaw or grinder. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Colour: black MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd 50 per box, 200 per carton

Read more less