If You Haven't Already Done So Register Here For Trade Account

Victron Energy MultiPlus Compact 12/800/35-16 VE.Bus – CMP128010000

Description


 

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

 

Two AC Outputs

The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).

virtually unlimited power thanks to parallel operation

Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three phase capability

In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

PowerControl – Dealing with limited generator, shore side or grid power

The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power

This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure

The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.

System configuring

  • In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
  • Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
  • Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

On-site Monitoring and control

Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote Monitoring and control

  • Color Control GX or other GX devices.
  • Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

Remote configuring

When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.

     

    Brand

    Victron Energy

    Manufacturer Part Number

    CMP128010000

    Voltage

    12V

    Transfer Switch

    16A

    Cont. output power at 25 °C

    800VA

    Cont. output power at 40 °C

    650W

    Peak power

    1600W

    Efficiency

    92%

    Zero load power

    8W

    Charge Current House Battery

    35A

    Charge Current Starter Battery

    4A (12V and 24V models only)

    Battery Temperature Sensor

    Yes

    Programmable Relay

    Yes

    VE.Bus Communication Port

    For parallel and three phase operation, remote monitoring and system integration

    Remote on-off

    Yes

    Protection Category

    IP21

    Battery-Connection

    Battery cables of 1.5 meter

    Dimensions

    H375 x W214 x D110mm

    Weight

    10Kg

    Warranty

    5 Years

    Country of Manufacture

    China


    Product form

    CLICK HERE FOR SPEC SHEETS   The MultiPlus, as the name suggests, is a combined inverter and charger in one... Read more

    £371.40 Exc. VAT
    £445.68 Inc. VAT

    • Quality
    • Reliabilty
    • Trusted

    Description


     

    The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

     

    Two AC Outputs

    The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).

    virtually unlimited power thanks to parallel operation

    Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

    Three phase capability

    In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

    PowerControl – Dealing with limited generator, shore side or grid power

    The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

    PowerAssist – Boosting the capacity of shore or generator power

    This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

    Solar energy: AC power available even during a grid failure

    The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.

    System configuring

    • In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
    • Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
    • Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

    On-site Monitoring and control

    Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

    Remote Monitoring and control

    • Color Control GX or other GX devices.
    • Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

    Remote configuring

    When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.

       

      Brand

      Victron Energy

      Manufacturer Part Number

      CMP128010000

      Voltage

      12V

      Transfer Switch

      16A

      Cont. output power at 25 °C

      800VA

      Cont. output power at 40 °C

      650W

      Peak power

      1600W

      Efficiency

      92%

      Zero load power

      8W

      Charge Current House Battery

      35A

      Charge Current Starter Battery

      4A (12V and 24V models only)

      Battery Temperature Sensor

      Yes

      Programmable Relay

      Yes

      VE.Bus Communication Port

      For parallel and three phase operation, remote monitoring and system integration

      Remote on-off

      Yes

      Protection Category

      IP21

      Battery-Connection

      Battery cables of 1.5 meter

      Dimensions

      H375 x W214 x D110mm

      Weight

      10Kg

      Warranty

      5 Years

      Country of Manufacture

      China


      Forgot Password


      Back to top