INVERTERS FOR SOLAR / BATTERY STORAGE

PLEASE NOTE THIS PRODUCT IS CURRENTLY ONLY AVAILABLE WITH A SOLIS INVERTER Part No: SOL-DLS-W3 Display - Web Interfaces The Solis Wi-Fi stick is a very clever, simple, external plug-in device, which is fully universal across the Solis inverter range. The S3 Wi-Fi Stick is faster, more responsive, and has an all-round better build quality. This 3rd Gen device includes 3 external LEDs to confirm connection status as well as a reset button on the outside Connect to up to 10 inverters with one S3 datalogger  Quick Installation which only requires the installer to have a smartphone/laptop to hand; the only customer requirement is a WIFI network within range of the inverter. The unit provides a simple to install monitoring solution for end customers with access to web, iPhone, and Android app monitoring.  In addition to free access to the monitoring website there is also an installer level login so the installer can view all their Solis inverters installed in one place.  The unit provides a user friendly, easily accessible solution to inverter monitoring.  Keywords: SOLDLSW, Display, Web Interface

Read more less

Part No: GIV-EVCHARGER EV Charging - EV Charger The EV Charger is a new member of the GivEnergy family. Compatible with most plug-in electric cars, the EV charger is a great addition to your smart home system and GivEnergy eco-system. It’s compact and waterproof design allows for installation in tight spaces both indoor and outdoor. Integrated WiFi allows for easy control of your vehicle’s charge via the GivEnergy Monitoring Portal or App. Grid Power - Schedule your charing for the cheapest, cleanest off-peak energy Renewable Power - Charge your EV for the free using excess solar, wind, or hydro generation Battery Power - Manipulate the flow of energy from your storage battery to your EV charger Features: 7kW / 32A AC power output rating 5m charging cable length Plug and Play App Controlled Integrated PEN Protection Solar Diversion 5m Type 2 Connector Cable LAN(RJ-45), WiFi and 4G Connectivity Dimensions: 288 x 260 x 112 (mm) Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services Supplier Part No:GivEnergy EV Charger Weight:4.5 kg

Read more less

Cut your costs with smart green energy solutions. With GivEnergy technology, you can power your home or business cheaply and sustainably. Become part of a cleaner world. With GivEnergy batteries installed, you can: - Store energy from the grid, solar, wind, or hydro - Use that stored energy to power your home - Avoid high peak charges, outages, and grid dependence This Bundle Includes: 1 x GivEnergy Gen 3 5kW Hybrid Inverter 1 x GivEnergy 9.5kWh Battery 1 x GivEnergy Gem120CT Meter 1 x GivEnergy All-in-One to All-in-One Cable  

Read more less

Part No: SHINE-WIFI-X Display - Web Interfaces Shine-Wi-Fi-X is a monitoring solution for grid-tie, off-grid inverter, single and three phase inverters.  Simple Allows for cable free, easy installation Plug-and-play solution USB data interface Reliable Max. communication range of 50m Works with the ShineServer Smart Both Android and IOS UI are available Shine Wi-Fi X is for -X range inverters

Read more less

Part No: SUN-5.0-ECCO Storage Systems - Hybrid Inverter The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package! Product Features Dual MPPT design  Compatible with most Lithium-ion batteries and Lead Acid batteries Mobile App for monitoring IP65 rated Automatic switching from Grid-Tied to Off-Grid mode Zero export function Up to 16 units with the same firmware can be paralleled Essential and Non-Essential Loads outputs Comes with the Wi-Fi logger and CT Compatible with SolarMan App for Monitoring  Supplier Part No: Sunsynk-5.5-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 11,000 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: SUN-8.0-ECCO Storage Systems - Hybrid Inverter The Sunsynk 5kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.  Product Features Dual MPPT design  Compatible with most Lithium-ion batteries and Lead Acid batteries Mobile App for monitoring IP65 rated Automatic switching from Grid-Tied to Off-Grid mode Zero export function Up to 16 units with the same firmware can be paralleled Essential and Non-Essential Loads outputs Comes with the Wi-Fi logger and CT Compatible with SolarMan App for Monitoring Pylontech Compatibility Tested: US 3000C  US 2000B-Plus US 3000B Not currently tested with Pylon – LV Hub please consult with us before proceeding For installations with the US3000C and UP5000 please use the following BMS cable    INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here to gain full activation of the warranty. BEFORE INSTALLATION, please ensure that you check that the Inverter is updated to the latest firmware version.  Latest Version 3367 E41C Supplier Part No: Sunsynk-8.8-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 8,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: SOL-3.0K-RAI-48ES-5G-AC Storage Systems - Charger-Inverter 5G Energy Storage Inverter Product Features Natural cooling without external fan Various work mode for different application scenarios IP65 degree, applicable for different installation environments Optional stand-alone mode ensures constant power supply for critical load Available to integrate all renewable energy system including solar, wind, fuel cell etc Advanced BMS to enhance the battery usage and guarantee the longer battery lifespan Compatible with any existing grid-tied PV system, option to upgrade the current grid-tied system to a new battery storage system Convenient real-time monitoring realized via wireless communication and intelligent debugging APP which support one-click inverter configuration Please ensure the SOLIS AC charger is connected on the AC side with a terminal block, not an AC plug. This product is supplied with an energy meter and CT clamp. Supplier Part No:  SOLIS-RAI-3K-48ES-5G-AC-V2 Weight: 15 kg Rated Power: 3,000 W Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet Solis AC Coupled

Read more less

HIGH STOCK LEVELS Part No: SOL-5K-RHI-48ES-5G-DC Storage Systems - Hybrid Inverter Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.  Product Features Fanless design IP65 High charge and discharge efficiency Multiple work modes resulting in max self-consumption Intelligent  BMS function 24 hour real-time intelligent energy management  Remotely control & upgrade Certifications and documents pending Supplier Part No: SOL-5K-RHI-48ES-5G-DC Weight: 21.5 kg Rated Power: 5,000 W Min PPT Voltage: 120 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 8,000 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 6,000 W Max DC Current: 27.52 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 96.8 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet Solis RHI 1Ph 5G English

Read more less

The Libbi battery top cover acts as a cosmetic piece when installing a 15/20kW system. With the batteries sitting in two banks of two, the set without the inverter on top would have handles visibly showing on the top. The top cover covers these handles.

Read more less

Part No: GIV-PE-KIT-G3 Storage Systems - Accessory GivEnergy PE Bonding Kit for Gen3. Please note: This item is free of charge WHEN purchased with a GivEnergy Generation 3 hybrid.  MUST BE ADDED ALONGSIDE GEN 3 INVERTER.

Read more less

Part No: GIV-HY-5.0-G3 Storage Systems - Hybrid Inverter GivEnergy Hybrid Inverter 5.0kW Gen 3  The third generation of the GivEnergy Hybrid Inverter is a battery and solar inverter in one unit PLEASE NOTE: AN EARTH BONDING KIT IS REQUIRED WITH EVERY GEN 3 INVERTER. THIS IS NOT INCLUDED AND MUST BE ADDED SEPARATELY. It can be coupled directly with solar panels to generate usable electricity in the property as well as store any excess energy for later use in a battery. The Hybrid Inverter aims to minimise export by storing excess energy in the battery during generation hours. Additionally, it will minimise import by discharging to meet demand in the property Spec MPPT Range 120V - 550V Max. Short Circuit Current (per string) 20A Max. Input Current (per string) 15A MPPT Tracker / No. of Strings per MPPT Tracker 2/1 Features  In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 5 Year Warranty Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GIVENERGY before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GIVENERGY for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services PLEASE NOTE: We are still awaiting additional documents from the manufacturer. These will be uploaded as soon as received.

Read more less

HIGH STOCK LEVELS Part No: SOL-6K-RHI-48ES-5G-DC Storage Systems - Hybrid Inverter Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.  Product Features Max PV input of 8000W Fanless design IP65 100A charge and discharge current Multiple work modes resulting in max self-consumption Intelligent BMS function 24 hour real-time intelligent energy management  Remotely control & upgrade Uninterrupted power supply with 20ms reaction Comes with a meter and CT Supplier Part No: S5-EH1P6K-L Weight: 22 kg Rated Power: 6,000 W Min PPT Voltage: 90 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 8,000 W Max AC Power (5 Minutes): 6,600 W Surge AC Power (1 Second): 7,200 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 96.8 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet Solis RHI 1Ph 5G English

Read more less

Part No: SUN-3.6-ECCO Storage Systems - Hybrid Inverter The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as; Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack 5yr warranty as standard IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled  Supplier Part No: SUNsynk-3.5K-SGO1LP1 ECCO Weight: 20.5 kg Rated Power: 3,600 W Min PPT Voltage: 125 V Max PPT Voltage: 500 V DC Startup Voltage: 150 V DC Shutdown Voltage: 125 V Max Input Voltage: 500 V Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.9 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: FE-KH1-8.0 Storage Systems - Hybrid Inverter The FoxESS KH8 is a stylish 8kW single phase IP65 full hybrid inverter. The Fox KH8 uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most out of your solar system. The FoxESS KH8 is easy to install, saving you valuable time on site. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.    Supplier Part No: FE-KH1-8.0 Weight: 29 kg Rated Power: 8,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 48 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Details The GivEnergy 11kW Hybrid 3 Phase Inverter is a powerful and versatile unit that combines both a battery inverter and a solar inverter in one. This allows for easy and efficient use of both solar panels and energy storage to generate and store electricity for later use. The inverter is AC and DC coupled, making it incredibly flexible and easy to install. It also features on/off grid phase balancing, which ensures that power is distributed evenly between the grid and the battery. With a discharge rate of up to 11kW, it can easily meet the energy demands of any property. One of the key benefits of the GivEnergy Hybrid Inverter is its increased efficiency. It can deliver higher discharge rates, which means that it is able to store and distribute more energy than other similar inverters on the market. This makes it an ideal choice for anyone looking to maximise their energy savings and reduce their carbon footprint. The in-built WiFi network connection allows for easy monitoring and control of the system, so you can always keep track of your energy usage and make adjustments as needed. The unit is also compatible with the GivEnergy HV 3.4kwh battery range, making it a seamless addition to any existing energy storage setup. With a weight of 35kg and a 5-year warranty, the GivEnergy 11kW Hybrid 3 Phase Inverter is a reliable and high-performance choice for any property owner looking to harness the power of solar energy and energy storage. Contact us for lead times. Product Features High discharge rate - up to 11kW Low tariff rates - charge from the grid at off-peak times Peace-of-mind - 5 year full manufacturer's warranty Three phase connection Compact size, big output - weights only 35kg and measures 658 x 214 x 480mm Works with the Givenergy HV 3.4kwh battery range

Read more less

Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).  Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.  All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel.  IP43 protectionWhen installed with the screw terminals oriented downwards.  Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only.  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ORI244828110 Input Voltage Range 16-35V Under Voltage Shutdown 14V Under Voltage Restart 15V Nominal Output Voltage 48.2V Output Voltage Adjust Range 40-60V Short Circuit Output Current 25A Cont. Output Power at 25°C 320W DC Connection Screw Terminals Protection Category IP43 Dimensions H130 x W186 x D70 mm Weight (kg) 1.3 Warranty 5 Years

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Uses high voltage batteries HV2600 & FOX CUBE IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% BMS unit required 2 x HV2600 batteries minimum CT Clamp is included in the box Supplier Part No: AC1- 5.0 (with EPS) Weight: 25 kg Rated Power: 5,000 W

Read more less

The GivEnergy AC Charger will charge from surplus PV generation, and also from the grid if you're on an economy tariff. Wi-fi comes as standard and gives access to the powerful monitoring platform, along with remote, site-specific firmware upgrades and troubleshooting via web browser or app. System needs to be connected to the internet to comply with warranty requirements. Product Features Uses GivEnergy Lithium batteries that can be added to extend KWh of battery bank Installed to new builds or retrofitted to an existing solar pv system  Monitor usage through web-app interface Lightweight and compact Backup function supported Effective of Monday, September 11th, the GivEnergy residential battery storage system will no longer offer a 5-year warranty with the option of extending it to 10 years. Instead, all residential batteries, inverters, and AIO units will now come with a standard 12-year warranty. Systems installed before the 11th of September still have 60 days to order a warranty extension. Major announcement: introducing an industry leading 12 year warranty | GivEnergy FAQ: The GivEnergy 12 year warranty | GivEnergy Supplier Part No: GIV-AC3.0 Weight: 22.5 kg Rated Power: 3,000 W

Read more less

Part No: SOL-3.6K-RHI-48ES-5G-DC Storage Systems - Hybrid Inverter Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted.  Product Features Fanless design IP65 High charge and discharge efficiency Multiple work modes resulting in max self-consumption Intellegent  BMS function 24 hour real-time intelligent energy management  Remotely control & upgrade Supplier Part No: S5-EH1P3.6K-L Weight: 20.5 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 4,320 W Max DC Current: 27.52 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 2 Euro Efficiency: 96.8 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet Solis RHI 1Ph 5G English

Read more less

  The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 5kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  Key features: Myenergi Ecosystem - Integrates with your myenergi devices, prioritising power to your home, eddi or zappi. Ultimate Control - The libbi gives you the option to charge solely from solar or through the grid or a mixture of the 2. It also has the capability optimise grid charging around your energy tariff. Remote Access - The myenergi app allows you to access and contorl your libbi and other myenergi devices from anywhere in the world. It also allows you to monitor live import and export to from and to the grid. Modular battery storage - Each battery module can store 5kWh of energy. This is scalable up to 4 batteries, offering a total maximum capacity of 20kWh Flexible Install - The libbi works as both an AC and DC coupled battery system with solar PV and can also work as a battery inverter without any PV at all. Optional Blackout Back Up - Instant energy available to a dedicated socket or lighting circuit in the event of a power cut. AC Output Max power 5000W Max current 22A Number of phases 1 DC attributes (Inverter) Number of MPPTs 2 V range of MPPT 80 - 560V Max power 6500W Max current 15A Max voltage 580V Start up voltage 150V System Max efficiency 97.6% IP rating IP65 Built in protection AC and DC surge protection Type II, arc fault Export limitations Possible using CT or meter Weight 32kg Dimensions 540 x 590 x 240mm Communication WiFi and Ethernet Warranty (extensions) 5 years DC Attributes (Battery Input) Max charge current 100A Max discharge current 100A Max charge power 4600W Max discharge power 5000W Nominal batt voltage 48V Battery Type LiFePO4

Read more less

The SolaX X1 Hybrid 7.5kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The Gen4 has been designed and developed using the very latest solar technology. SolaX  have pushed back the boundaries for what is possible when designing a storage inverter. The ground-breaking SolaX X1 Hybrid 7.5kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. In-built EPS changeover switch Supports up to 150% PV oversizing and 110% overload output Can work at full capacity down to -35C 97.0% Charge/discharge efficiency On-grid and off-grid use 5 work modes, 2 charging periods available IP65 protection level CT compatible, loads respond within 0.3s 30 Minute Total Installation Time Includes WiFi Dongle

Read more less

Cut your costs with smart green energy solutions. With GivEnergy technology, you can power your home or business cheaply and sustainably. Become part of a cleaner world. With GivEnergy batteries installed, you can: - Store energy from the grid, solar, wind, or hydro - Use that stored energy to power your home - Avoid high peak charges, outages, and grid dependence   GivEnergy design and manufacture their own inverters, batteries and state-of-the-art management system and monitoring platform which combine to offer an exceptional storage package. The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems. This Bundle Includes: 1 x GivEnergy Gen 3 5kW Hybrid Inverter 1 x GivEnergy 2.6kWh Battery 1 x GivEnergy 100A DC Breaker 1 x GivEnergy Gem120CT Meter 1 x GivEnergy All-in-One to Ring Terminal Cable

Read more less

Part No: PEAS69-EL32R-4-1P Switches - AC Isolators This part is made up of the following items: 1 x PEAS69-EL32R-4 Projoy AC Isolator 32A 4pole   PEAS69-EL Enclosure AC Isolator 32A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification   Weight: 0.4 kg Rated Power: 7,360 W

Read more less

Details Introducing the GivEnergy 6kW Hybrid 3 Phase Inverter - a powerful and versatile unit that combines a battery inverter and a solar inverter into one compact device. Whether you're looking to generate electricity using solar panels, store excess energy in a battery, or both, this hybrid inverter has got you covered. With easy plug-and-play installation, you can quickly and easily start generating usable electricity in your property. The inverter also features on/off grid phase balancing, which helps to ensure that your energy supply is reliable and consistent no matter what. One of the standout features of the GivEnergy 6kW Hybrid 3 Phase Inverter is its ability to minimise import by discharging to meet demand in the property. This means that you can save money on your energy bills by using stored energy during peak demand times. For those who want to take their energy independence to the next level, the GivEnergy 6kW Hybrid 3 Phase Inverter is compatible with the GivEnergy HV 3.4kWh battery range. This allows you to store even more excess energy and have it available when you need it. Contact us for lead times. Product Features: Simple to install - plug-and-play functionality No Wi-Fi dongle required - built in Wi-Fi network connection Peace-of-mind - 5 year warranty Compact and lightweight - weighs only 35kg making it suitable for wall mounting Works with the Givenergy HV 3.4kWh battery range

Read more less

High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.  CLICK HERE FOR SPEC SHEETS Brand Victron Energy Manufacturer Part Number SPM040901200 Voltage 12 Nominal Power (W) 90 Number of cells in series 36 Maximun System Voltage 1000 Dimensions L780 x W668 x D30mm Weight (kg) 6.1 Warranty 5 Years Cell Type Monocrystalline

Read more less

Shunt 1000A/50mV-0,5 / 2xM10 Brand Victron Energy Manufacturer Part Number SHU102050200 Warranty 5 Years

Read more less

Part No: SOL-S5-GR3P-15K-DC Inverters - Main Units Rating: 15,000W Phases: 3 Series 5 GR3P Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.6%  Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 16A PV string input x 4 Maximum AC output power of 16.5kW  Max PV DC Power of 22.5kW Integrated AFCI (DC arc-fault circuit protection) IP66 Rated  DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. NRS-097-2-1 Certified

Read more less

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.   Features Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.  Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.  Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.  CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC115070411 GTIN 8719076050322 Battery Voltage 12/24/48V Auto Select (36V: manual) Rated Charge Current 70A Nominal PV Power, 12V 1000W Nominal PV Power, 24V 2000W Max. PV Short Circuit Current 50A Maximum PV Open Circuit Voltage 150V absolute maximum coldest conditions, 145V start-up and operating maximum Efficiency 98% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Can, VE.Direct and Bluetooth IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years

Read more less

Part No: SOL-4.0-S6-DT-DC Inverters - Main Units Rating: 4,000W Phases: 1 Solis S6 is the latest generation of residential inverters from Solis. This range of inverters are leaders in affordable small residential and commercial rooftop installations.  Product Features   Maximum string input current 14A   Easy installation: Integrate with export power control function and DRM function.   Max. Efficiency over 97.7% European efficiency over 97.1%   Wide input voltage range for better generation and low startup    Dual MPPT design with precise MPPT algorithm   Export Limitation built in - Requires CT clamp (sold separately)   Integrated AFCI (DC arc-fault circuit protection)   Rated IP66 With built in DC switch.    Supplier Part No:S6-GR1P4K-DCWeight: 12 kgRated Power: 4,000 WMin PPT Voltage: 60 VMax PPT Voltage: 600 VDC Startup Voltage: 60 VDC Shutdown Voltage: 50 VMax Input Voltage: 600 VMax DC Power: 6,000 WMax AC Power (5 Minutes): 4,400 WSurge AC Power (1 Second): 4,400 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 2Euro Efficiency: 97.1 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 5 years Click Here For Specs 

Read more less

Part No: SOL-S5-GC30K-DC Inverters - Main UnitsRating: 30,000WPhases: 3S5-GC30K - Series 5 Three Phase Grid-Tied InverterProduct Features:Max. efficiency of 98.5% Type-II over-voltage surge protection for both DC and ACWide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V32A input per MPPT, 16A input for each PV stringMaximum AC output power of 33kW 3 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatchIntelligent monitoring, Smart I-V Curve DiagnosisIntegrated AFCI (DC arc-fault circuit protection)IP66 Rated DC reverse-polarity protection5-year standard warrantyRegister on SolisCloud, to support remote upgrade and control.SA: NRS-097-2-1 CertifiedEU: German installation manual stlll pending from manufacturer. UK: Please note that a slight adjustment was required on the G99 report which has resulted in S5-GC range temporarily losing their G99 approved status. The updated form has already been resubmitted to the ENA and is currently awaiting assessment. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a result of incorrectly installed systems.Supplier Part No: SOL-S5-GC30K-DCWeight: 44 kgRated Power: 30,000 WMin PPT Voltage: 200 VMax PPT Voltage: 1,000 VDC Startup Voltage: 200 VDC Shutdown Voltage: 180 VMax Input Voltage: 1,100 VMax DC Power: 45,000 WMax AC Power (5 Minutes): 33,000 WSurge AC Power (1 Second): 33,000 WMax DC Current: 96 AMax DC Inputs: 6Has DC Fuses: 0Connector: MC4Included Connectors: 12Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity : 3Has Integrated DC Switch: YesWarranty: 5 yearsClick Here For Specs

Read more less

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.   Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.  For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Input fuse (not replaceable)  PLEASE CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ORI241224120 Input Voltage Range 16-35V Output Voltage Adjust Range 10-15V Nominal Output Voltage 12.2V Cont. Output Power at 25°C (W) 300W Cont. Output Power at 40°C (W) 240W Under Voltage Shutdown 14V Under Voltage Restart 15V DC Connection Screw Terminals Efficiency 88% Protection Category IP43 Dimensions H130 x W186 x D70mm Weight (kg) 1.3 Warranty 5 Years

Read more less

The EV Charging Station has three phase and single-phase capabilities. It delivers maximum 22kW AC in three phase mode or 7.3kW in single phase mode.   It incorporates 4.3-inch LCD touch screen for monitoring and control.   Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance.    GTIN 8719076051305 Input Voltage Range 170 – 265V AC Rated Charge Current 32A / phase Nominal Power 22kW Current Output Range 6 – 32A Data Communication Modbus TCP over WIFI Protection Category IP44 Dimensions H390 x W300 x D150mm Weight 3Kg Warranty 5 Years  

Read more less

Part No: SOL-RHI-3P10K-HVES-5G-DC Storage Systems - Hybrid Inverter This is the perfect three phase hybrid solution for medium to large houses and business use as well.  Product features         Phase Balance          Support three phase imbalance - available ONLY in the backup port during power cut         Grid Support Functionality          Time of use shifting and peak shaving capabilities to grid         High Efficiency Design          Maximum efficiency of 98.4%         Integrated Energy Management          Intelligent EMS function         2 MPPT and 4 DC input: Max 26A DC input current Supplier Part No: Solis-RHI-3P10K-HVES-5G-DC Weight: 29.5 kg Rated Power: 10,000 W Min PPT Voltage: 200 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 16,000 W Max AC Power (5 Minutes): 11,000 W Surge AC Power (1 Second): 12,000 W Max DC Current: 52 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.7 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years  

Read more less

Part No: SOL-8.0-5G-DT-DC Inverters - Main Units Rating: 8,000W Phases: 1    7-8kW 5G Single Phase Inverter Leading Features Over 98.1% Max. efficiency Friendly and adaptable connection to the grid Support 1.1 times overload, increase power generation IP65 protection grade, suitable for outdoor installation RS485, WiFi/LAN/GPRS (optional) interface Light weight 13.3 kg, Single-person maintainable installation WiFi monitoring available-Android and Apple App store available   Please note this inverter has two MPP trackers, each with different maximum allowed DC Current! MPP Tracker A is limited to 12.5A and should only have single string connected to it, MPP tracker B can have two strings connected to it with maximum current up to 25A.   Data Sheet Solis 1PH 5G 8K Supplier Part No: SOLIS-8.0-5G-DT-DC Weight: 13.3 kg Rated Power: 8,000 W Min PPT Voltage: 90 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 10,400 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,000 W Max DC Current: 37.5 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: GIV-HY3.6 Storage Systems - Hybrid Inverter  GivEnergy hybrid inverters is a must for every house hold where you have backup power during power outages as well as saving on your utility bill. This unique hybrid utilizes the free giving sunlight and makes it an flexible power source that is available when you need it as well as direct battery charge from your PV array. System needs to be connected to the internet to comply with warranty requirements. Product Features Uses GivEnergy Lithium batteries that can be added to extend KWh of battery bank Batteries can be charged from Solar PV as well as your current utility supply Cloud based monitoring and control through WEB APP interface Inverter can be remotely updated Via Wi-Fi /4G dongle Inverter do have 2500W backup power capability Available in 3.6KW and 5KW Inverter has 2 MPPT PV inputs that allow you to have solar panels in 2 different orientations Installations can be for new installs or retrofit to an existing system Backup function supported Please Note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID!  Givenergy system must be connected to the internet to benefit from full warranty services.   Supplier Part No: 3.6kW Hybrid inverter Weight: 33 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 100 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,679 W Surge AC Power (1 Second): 3,680 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No

Read more less

The CTEK Adapter is compatible with new and the pre 2008 charger models. Just connect to the CTEK charger fitted with the ’old style’ connector and the unit immediately becomes ready for use. Cable length is 120mm. Brand CTEK Product Code 56-689 Barcode (EAN) 7350009566896

Read more less

Cut your costs with smart green energy solutions. With GivEnergy technology, you can power your home or business cheaply and sustainably. Become part of a cleaner world. With GivEnergy batteries installed, you can: - Store energy from the grid, solar, wind, or hydro - Use that stored energy to power your home - Avoid high peak charges, outages, and grid dependence   GivEnergy design and manufacture their own inverters, batteries and state-of-the-art management system and monitoring platform which combine to offer an exceptional storage package. The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems.This Bundle Includes: 1 x GivEnergy Gen 3 3.6kW Hybrid Inverter 1 x GivEnergy 5.2kWh Battery 1 x GivEnergy 100A DC Breaker 1 x GivEnergy Gem120CT Meter 1 x GivEnergy All-in-One to Ring Terminal Cable

Read more less

  The MPPT WireBox provides an extra level of safety, and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws. Brand Victron Energy Manufacturer Part Number SCC950400310 Warranty 5 Years

Read more less

Solarcable L=3m/6sqmm MC4-M/F Connection Brand Victron Energy Manufacturer Part Number SCA000300100 Warranty 5 Years

Read more less

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.   Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.  CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number SCC125110441 GTIN 8719076050926 Battery Voltage 12/24/48V Auto Select (36V: manual) Rated Charge Current 100A Nominal PV Power, 12V 1450W Nominal PV Power, 24V 2900W Max. PV Short Circuit Current 70A Maximum PV Open Circuit Voltage 250V absolute maximum coldest conditions | 245V start-up and operating maximum Efficiency 99% Charge Algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Data Communication Port VE.Can IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years

Read more less

The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 5kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  This Kit Includes: 1 x 5kW Libbi Inverter 3 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 15kWh Battery Kit 

Read more less

MEGA-fuse 125A/32V (package of 5 pcs) Brand Victron Energy Manufacturer Part Number CIP136125010 Warranty 5 Years Appr. Voltage Drop 90 mV Cold Resistance 0.4    

Read more less

CLICK HERE FOR SPEC SHEETS The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.   Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP242300001 Voltage 24 Transfer Switch (A) 16 or 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 94% Zero Load Power (W) 20 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 4 (12 V and 24 V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 18 Warranty 5 Years Country of Manufacture India

Read more less

Solar connector pair MC4, 1x Male/1x Female Brand Victron Energy Manufacturer Part Number SCA520300000 Warranty 5 Years

Read more less

Part No: SOL-1.5-MINI-S6-DC Inverters - Main Units Rating: 1,500W Phases: 1 The All New Solis Mini 6S Series Grid-tie Inverter. Compact and lightweight design, for easy installation. Fanless, minimal noise, producing less than 20 dBA. Compatible with high-efficiency modules and bi-facial modules. Product Features Super high frequency switching technology with maximum efficiency of 96.6% Max PV Power of 2.3kW DRM (Demand Response Mode) integrated and backflow power control function for smart grid requirements. Wide voltage range - Ultra low start-up voltage of 60V and max PV input voltage of 600V Intergrated Export Power Manager (EPM) Integrated AFCI (DC arc-fault circuit protection) Integrated DC switch for emergency shut-down of PV power or safe PV maintenance 5-year standard warranty Supplier Part No: S6-GR1P1.5K-M-DCWeight: 7.4 kgRated Power: 1,500 WMin PPT Voltage: 60 VMax PPT Voltage: 500 VDC Startup Voltage: 60 VDC Shutdown Voltage: 50 VMax Input Voltage: 600 VMax DC Power: 2,300 WMax AC Power (5 Minutes): 1,650 WSurge AC Power (1 Second): 1,650 WMax DC Current: 14 AMax DC Inputs: 1Has DC Fuses: 0Connector: MC4 Included Connectors: 1Euro Efficiency: 95.4 %Transformer: NoneMPPT Quantity : 1Has Integrated DC Switch: YesWarranty: 5 years Click Here For Specs 

Read more less

Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. Victron offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protection cover.  Available models: 150A / 70V – 4 high current connections 150A / 70V – 6 high current connections 250A / 70V – 4 high current connections 600A / 70V – 4 high current connections and 8 low current connections 600A / 70V – 8 high current connections and 8 low current connections  For more technical information and for the busbar dimensions see the datasheet.     Brand Victron Energy Manufacturer Part Number VBB115040020 GTIN 8719076052197 Maximum Current 150A Maximum Voltage 70VDC Terminal Diameter 6.35mm Terminal Height 17mm Dimensions H45 x W152.4 x D31.8mm Weight 0.2Kg Warranty 5 Years

Read more less

Part No: SOL-6.0-S6-DT-DC Inverters - Main Units Rating: 6,000W Phases: 1 Solis S6 is the latest generation of residential inverters from Solis. This range of inverters are leaders in affordable small residential and commercial rooftop installations.  Product Features   Maximum string input current 14A   Easy installation: Integrate with export power control function and DRM function.   Max. Efficiency over 97.7% European efficiency over 97.1%   Wide input voltage range for better generation and low startup    Dual MPPT design with precise MPPT algorithm   Export Limitation built in - Requires CT clamp (sold separately)   Integrated AFCI (DC arc-fault circuit protection)   Rated IP66 With built in DC switch.    Need monitoring?  The Solis WIFI adaptor is compatible with all Solis inverters, click here for details.    This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems. Supplier Part No: S6-GR1P6K-DCWeight: 12 kgRated Power: 6,000 WMin PPT Voltage: 120 VMax PPT Voltage: 520 VDC Startup Voltage: 120 VDC Shutdown Voltage: 90 VMax Input Voltage: 600 VMax DC Power: 9,000 WMax AC Power (5 Minutes): 6,000 WSurge AC Power (1 Second): 6,000 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 4Euro Efficiency: 97.1 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: YesWarranty: 5 years Click Here For Sepcs 

Read more less

Part No: SOL-RHI-3P8K-HVES-5G-DC Storage Systems - Hybrid Inverter This is the perfect three phase hybrid solution for medium to large houses and business use as well.  Product features 2 x MPPT and 4 DC input at max of 26A 3 x operation modes Self-consumption; time of use; off-grid backup 4 models range from 5KW to 10 KW output as well as backup Supporting Li-ion high voltage batteries ranging from 160 to 600VDC Time of use shifting peak shaving capabilities to grid Intelligent EMS function Supporting three-phase imbalance - available ONLY in the backup port during power cut 24-hour monitor and management system Remotely control and upgrade any selected inverter Supplier Part No: Solis-RHI-3P8K-HVES-5G-DC Weight: 25.1 kg Rated Power: 8,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 12,800 W Max AC Power (5 Minutes): 8,800 W Surge AC Power (1 Second): 9,600 W Max DC Current: 39 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.7 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world.

Read more less